Science:MATH105 Probability/Lesson 1 DRV/1.03b Common Discrete Distributions
A random variable is a theoretical representation of a physical or experimental process we wish to study. Formally, it is a function defined over a sample space of possible outcomes. For our simple coin tossing experiment, where we flip a fair coin once and observe the outcome, our sample space consists of the two outcomes H or T. When tossing two fair coins sequentially, our sample space consists of the four outcomes HH, HT, TH or TT.
Let us fix a sample space of n tosses of a fair coin. Experimentally, we may be interested in studying the number of "heads" observed after tossing the coin n times. Or we could be interested in studying the number of tosses needed to first observe "heads". Or we could be interested in studying how likely a certain sequence of "heads" and "tails" is to be observed. Each of these experiments are defined on the same sample space (the events generated by n tosses of a fair coin), yet each strive to quantify different things. Consequently, each experiment should be associated with a different random variable.
The Binomial Random Variable
Let X_{n} denote the random variable the counts the number of times we observe "heads" when flipping a fair coin n times. Clearly, X can take on any integer value from 0 to n, corresponding to the experimental outcome of observing 0 to n "heads". How likely is any particular outcome? Notice that we do not care about the order of the observations here, so that if n = 3, the outcome THH is equivalent to the outcomes HTH and HHT. Each of these outcomes contains two "heads".
The likelihood of any particular outcome is what is represented by the probability density function (PDF) of the random variable. Suppose n = 2. Then we see that the PDF of X_{2} is given by:
- Pr(X_{2} = 0) = 1/4
- Pr(X_{2} = 1) = 1/2
- Pr(X_{2} = 2) = 1/4
We say that X_{2} is a binomial random variable with parameters 2 (the number of times we flip the fair coin) and 1/2 (the probability that we observe heads after a single flip of the coin). We can write X_{2} ~ Bin(2, 1/2).
Binomial PDF |
---|
If X is a binomial random variable associated to n independent trials, each with a success probability p, then the probability density function of X is:
Failed to parse (syntax error): {\displaystyle \textrm{Pr}( X = k ) = \frac {n!}{k!(n-k)!}\ ·p^k(1-p)^{n-k},} where k is any integer from 0 to n. Recall that the factorial notation n! denotes the product of the first n positive integers: n! = 1·2·3···(n-1)·n, and that we observe the convention 0! = 1. |
Just as we did with Bernoulli random variables, we can think of our coin tossing experiment a bit more abstractly. Specifically, we can think of observing "heads" as a success and observing "tails" as a failure. This abstraction will help us apply our coin tossing random variables to more general experiments.
For example, suppose that we know that 5% of all light bulbs produced by a particular manufacturer are defective. If we buy a package of 6 light bulbs and want to calculate the probability that at least one is defective, we can do so by identifying this experiment with a binomial random variable. Here, we can think of observing a defective bulb as a "success" and observing a functional bulb as a "failure". Then our experiment is given by the random variable X_{6} ~ Bin(6, 1/20), since we will observe 6 bulbs in total and each has a probability of 5/100 = 1/20 of being defective.
In general, we can think of observing n independent experimental trials and counting the number of "successes" that we witness. The probability distribution we associate with this setup is the binomial random variable with parameters n and p, where p is the probability of "success." We can denote this random variable by X_{n} ~ Bin(n, p).
The Geometric Random Variable
Now consider a slightly different experiment where we wish to flip our fair coin repeatedly until we first observe "heads". Since we can first observe heads on the first flip, the second flip, the third flip, or on any subsequent flip, we see that the possible values our random variable can take are 1, 2, 3,....
Of course, we can consider a more abstract experiment where we observe a sequence of trials until we first observe a success, where the probability of success is p. If we let X denote such a random variable, then we say that X is a geometric random variable with parameter p. We can denote this random variable by X ~ Geo(p).
Letting S denote the outcome of "success" and F denote the outcome of "failure", we can summarize the possible outcomes of a geometric experiment and their likelihoods in the following table.
Experimental Outcome | Value of the Random Variable, X = x | Probability |
---|---|---|
S | x = 1 | p |
FS | x = 2 | q·p |
FFS | x = 3 | q^{2}·p |
FFFS | x = 4 | q^{3}·p |
FFFFS | x = 5 | q^{4}·p |
... | ... | ... |
When flipping a fair coin, we see that X ~ Geo(1/2), so that our PDF takes the particularly simple form Pr(X = k) = (1/2)^{k} for any positive integer k.
The Discrete Uniform Random Variable
Now consider a coin tossing experiment of flipping a fair coin n times and observing the sequence of "heads" and "tails". Because each outcome of a single flip of the coin is equally likely, and because the outcome of a single flip does not affect the outcome of another flip, we see that the likelihood of observing any particular sequence of "heads" and "tails" will always be the same. Notice that for n = 2 or 6, we have already encountered this random variable.
We say that a random variable X has a discrete uniform distribution on n points if X can assume any one of n values, each with equal probability. Evidently then, if X takes integer values from 1 to n, we find that the PDF of X must be Pr(X = k) = 1/n, for any integer k between 1 and n.