Documentation:CTLT 2.22 Lecturn Cheat Sheet/HD Cable Setup

From UBC Wiki

Using HD Cable

  • Choice of one or two projector screens
  • One screen is on the white wall, one on the red wall
  • Follow the steps below to set up HD Cable
  • Touch the Crestron Screen at the front of the room to get it started if it is asleep, or open the Crestron app on the 2.22 iPad (removable from its wall dock) - the iPad can control the Projectors/Audio from anywhere in the room
The Crestron Screen in Room 2.22
  • Select the Projector(s) you would like to use: Red Wall, White Wall, Both, or Audio Only (White Wall is preferred if using the whole room, Red Wall if only using the Northern half of the room)
Selecting Projector(s) for Output
  • Select "HD Cable"
Selecting the HD Cable Input
  • Wait a minute or two for the Projector(s) to warm up and finish starting up
Waiting for the Projector to Warm Up
  • Control the HD Cable using the remote provided in the room