https://wiki.ubc.ca/api.php?action=feedcontributions&user=MENNATALLAABDELRAHMAN&feedformat=atomUBC Wiki - User contributions [en]2024-03-28T14:35:01ZUser contributionsMediaWiki 1.39.6https://wiki.ubc.ca/index.php?title=File:Mennatalla_akl.jpg&diff=606945File:Mennatalla akl.jpg2020-07-13T17:42:48Z<p>MENNATALLAABDELRAHMAN: User created page with UploadWizard</p>
<hr />
<div>=={{int:filedesc}}==<br />
{{Information<br />
|description={{en|1=Mennatalla akl}}<br />
|date=2020-07-13<br />
|source={{own}}<br />
|author=[[User:MENNATALLAABDELRAHMAN|MENNATALLAABDELRAHMAN]]<br />
|permission=<br />
|other versions=<br />
}}<br />
<br />
=={{int:license-header}}==<br />
{{self|cc-by-sa-4.0}}<br />
<br />
[[Category:Picture]]<br />
[[Category:User Interface]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=File:Menna%27s_picture.jpg&diff=606921File:Menna's picture.jpg2020-07-13T16:51:26Z<p>MENNATALLAABDELRAHMAN: /* Summary */ name</p>
<hr />
<div>=={{int:filedesc}}==<br />
{{Information<br />
|description={{en|1=Menna Akl}}<br />
|date=2020-07-13<br />
|source={{own}}<br />
|author=[[User:MENNATALLAABDELRAHMAN|MENNATALLAABDELRAHMAN]]<br />
|permission=<br />
|other versions=<br />
}}<br />
<br />
=={{int:license-header}}==<br />
{{self|cc-by-sa-4.0}}<br />
<br />
[[Category:Picture of of one member]]<br />
[[Category:User Interface Sub-team]]<br />
[[Category:Team]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=File:U_schematic.jpg&diff=606915File:U schematic.jpg2020-07-13T16:44:50Z<p>MENNATALLAABDELRAHMAN: User created page with UploadWizard</p>
<hr />
<div>=={{int:filedesc}}==<br />
{{Information<br />
|description={{en|1=U schematic}}<br />
|date=2020-07-13<br />
|source={{own}}<br />
|author=[[User:MENNATALLAABDELRAHMAN|MENNATALLAABDELRAHMAN]]<br />
|permission=<br />
|other versions=<br />
}}<br />
<br />
=={{int:license-header}}==<br />
{{self|cc-by-sa-4.0}}<br />
<br />
[[Category:UBC]]<br />
[[Category:User Interface]]<br />
[[Category:UI]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=File:Menna%27s_picture.jpg&diff=606854File:Menna's picture.jpg2020-07-13T14:38:12Z<p>MENNATALLAABDELRAHMAN: User created page with UploadWizard</p>
<hr />
<div>=={{int:filedesc}}==<br />
{{Information<br />
|description={{en|1=Picture of Menna}}<br />
|date=2020-07-13<br />
|source={{own}}<br />
|author=[[User:MENNATALLAABDELRAHMAN|MENNATALLAABDELRAHMAN]]<br />
|permission=<br />
|other versions=<br />
}}<br />
<br />
=={{int:license-header}}==<br />
{{self|cc-by-sa-4.0}}<br />
<br />
[[Category:Picture of of one member]]<br />
[[Category:User Interface Sub-team]]<br />
[[Category:Team]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=Sandbox:Team_1_User_Interface&diff=606642Sandbox:Team 1 User Interface2020-07-13T03:40:23Z<p>MENNATALLAABDELRAHMAN: format</p>
<hr />
<div>'''User Interface Design''' <br />
<br />
'''7.1 Requirements'''<br />
<br />
'''7.1.1 Functions''' <br />
<br />
The functions of the user-interface sub-team are making the buttons read users’ input which represent each choice. <br />
<br />
Different instructions need to be displayed on the LCD screen when any of the three buttons is pressed by users. <br />
<br />
The LCD should be able to display messages. <br />
<br />
If the message is long, the LCD should be able to scroll left and right to ensure that users can read each word clearly. <br />
<br />
'''7.1.2 Objectives''' <br />
<br />
The objectives of the user-interface sub-team are to display messages of the function of each button in each step. For example, the message required users to start the dryer will be displayed at the beginning. <br />
<br />
When the dryer is working, the remaining time will be displayed on the screen and the time will be counted down. <br />
<br />
After the dryer finished working, the buzzer will make a sound to remind users to take out the things in the dryer. <br />
<br />
A 10k ohms potentiometer is also used to adjust the brightness of the LCD. <br />
<br />
'''7.1.3 Constraints'''<br />
<br />
The delay time between each step should be at least 10 seconds. A long delay time enables users to have enough time to make decisions.<br />
<br />
Second, thick wires and resistors should be used for safety. The current in the wire may be large if there are any wrong connections on the breadboard.<br />
<br />
In addition, the message should be displayed at the center of the LCD screen & the messages should be scrolled left and right. (The screen may be too small for all the messages shown on, so the message should be scrolled left and right repeatedly in order to enable users to see all information clearly.<br />
<br />
'''7.2 The design''' <br />
<br />
'''7.2.1 Hardware Layout'''<br />
<br />
The system of the cloth-dryer is designed to contain LCD, three buttons, and switch to allow the user to interact with the machine.<br />
<br />
The user can turn on and of the dryer using the switch. <br />
<br />
The three buttons are utilized to make the user input their preferences and operate the machine accordingly to the user inputs. <br />
<br />
The LCD to display the system <br />
<br />
'''7.2.2 Operating sequence'''<br />
<br />
The starts and end operations of the dryer depending on the mode whether it in manual mode or automatic mode.<br />
<br />
If the user turns on the switch and choose the manual mode, the dryer will operate for a specific time that is chosen by the user, and once the time passed, the dryer will turn off automatically. <br />
<br />
If the user turns on the switch and choose the automatic mode, the duration of drying the cloth will depend on the air temperature that the sensor measures outside the dryer to confirm that the cloth is dried, once the sensor reaches the set temperature and humidity reading, the dryer will turn off automatically.<br />
<br />
'''7.2.3 Temperature and Humidity'''<br />
<br />
For the manual mode, the temperature and humidity to dry the cloth are stabilized, and there are two options for the user to choose which are hot and moderate. <br />
<br />
For the automatic mode, the sensor is used to measure the outside air temperature and humidity of the dryer. This process is continuing until the sensor reads the set temperature to confirm that the cloth is dried then the dryer stopped to work. <br />
<br />
'''7.2.4 The Flowchart Program''' <br />
[[File:The_Program_Flowchart.png|thumb|flowchart]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=Sandbox:Team_1_User_Interface&diff=606641Sandbox:Team 1 User Interface2020-07-13T03:39:54Z<p>MENNATALLAABDELRAHMAN: content</p>
<hr />
<div>'''User Interface Design''' <br />
<br />
'''7.1 Requirements'''<br />
<br />
'''7.1.1 Functions''' <br />
<br />
The functions of the user-interface sub-team are making the buttons read users’ input which represent each choice. <br />
<br />
Different instructions need to be displayed on the LCD screen when any of the three buttons is pressed by users. <br />
<br />
The LCD should be able to display messages. <br />
<br />
If the message is long, the LCD should be able to scroll left and right to ensure that users can read each word clearly. <br />
<br />
'''7.1.2 Objectives''' <br />
<br />
The objectives of the user-interface sub-team are to display messages of the function of each button in each step. For example, the message required users to start the dryer will be displayed at the beginning. <br />
<br />
When the dryer is working, the remaining time will be displayed on the screen and the time will be counted down. <br />
<br />
After the dryer finished working, the buzzer will make a sound to remind users to take out the things in the dryer. <br />
<br />
A 10k ohms potentiometer is also used to adjust the brightness of the LCD. <br />
<br />
'''7.1.3 Constraints'''<br />
<br />
The delay time between each step should be at least 10 seconds. A long delay time enables users to have enough time to make decisions.<br />
<br />
Second, thick wires and resistors should be used for safety. The current in the wire may be large if there are any wrong connections on the breadboard.<br />
<br />
In addition, the message should be displayed at the center of the LCD screen & the messages should be scrolled left and right. (The screen may be too small for all the messages shown on, so the message should be scrolled left and right repeatedly in order to enable users to see all information clearly.<br />
<br />
'''7.2 The design''' <br />
<br />
'''7.2.1 Hardware Layout'''<br />
<br />
The system of the cloth-dryer is designed to contain LCD, three buttons, and switch to allow the user to interact with the machine.<br />
<br />
The user can turn on and of the dryer using the switch. <br />
<br />
The three buttons are utilized to make the user input their preferences and operate the machine accordingly to the user inputs. <br />
<br />
The LCD to display the system <br />
<br />
'''7.2.2 Operating sequence'''<br />
<br />
The starts and end operations of the dryer depending on the mode whether it in manual mode or automatic mode.<br />
<br />
If the user turns on the switch and choose the manual mode, the dryer will operate for a specific time that is chosen by the user, and once the time passed, the dryer will turn off automatically. <br />
<br />
If the user turns on the switch and choose the automatic mode, the duration of drying the cloth will depend on the air temperature that the sensor measures outside the dryer to confirm that the cloth is dried, once the sensor reaches the set temperature and humidity reading, the dryer will turn off automatically.<br />
<br />
'''7.2.3 Temperature and Humidity'''<br />
<br />
For the manual mode, the temperature and humidity to dry the cloth are stabilized, and there are two options for the user to choose which are hot and moderate. <br />
<br />
For the automatic mode, the sensor is used to measure the outside air temperature and humidity of the dryer. This process is continuing until the sensor reads the set temperature to confirm that the cloth is dried then the dryer stopped to work. <br />
<br />
'''7.2.4 The Flowchart Program''' <br />
[[File:The_Program_Flowchart.png|thumb|flowchart]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=Sandbox:Team_1_User_Interface&diff=606638Sandbox:Team 1 User Interface2020-07-13T03:32:06Z<p>MENNATALLAABDELRAHMAN: one more section</p>
<hr />
<div>'''User Interface Design''' <br />
<br />
'''7.1 Requirements'''<br />
<br />
'''7.1.1 Functions''' <br />
<br />
The functions of the user-interface sub-team are making the buttons read users’ input which represent each choice. <br />
<br />
Different instructions need to be displayed on the LCD screen when any of the three buttons is pressed by users. <br />
<br />
The LCD should be able to display messages. <br />
<br />
If the message is long, the LCD should be able to scroll left and right to ensure that users can read each word clearly. <br />
<br />
'''7.1.2 Objectives''' <br />
<br />
The objectives of the user-interface sub-team are to display messages of the function of each button in each step. For example, the message required users to start the dryer will be displayed at the beginning. <br />
<br />
When the dryer is working, the remaining time will be displayed on the screen and the time will be counted down. <br />
<br />
After the dryer finished working, the buzzer will make a sound to remind users to take out the things in the dryer. <br />
<br />
A 10k ohms potentiometer is also used to adjust the brightness of the LCD. <br />
<br />
'''7.1.3 Constraints'''<br />
<br />
The delay time between each step should be at least 10 seconds. A long delay time enables users to have enough time to make decisions.<br />
<br />
Second, thick wires and resistors should be used for safety. The current in the wire may be large if there are any wrong connections on the breadboard.<br />
<br />
In addition, the message should be displayed at the center of the LCD screen & the messages should be scrolled left and right. (The screen may be too small for all the messages shown on, so the message should be scrolled left and right repeatedly in order to enable users to see all information clearly.<br />
<br />
'''7.2 The design''' <br />
<br />
'''7.2.1 Hardware Layout'''<br />
<br />
The system of the cloth-dryer is designed to contain LCD, three buttons, and switch to allow the user to interact with the machine.<br />
<br />
The user can turn on and of the dryer using the switch. <br />
<br />
The three buttons are utilized to make the user input their preferences and operate the machine accordingly to the user inputs. <br />
<br />
'''7.2.2 Operating sequence'''<br />
<br />
The starts and end operation of the dryer depending on the mode whether it in manual mode or automatic mode.<br />
<br />
If the user turns on the switch and choose the manual, the dryer will operate for a specific time that is chosen by the user, and once the time passed, the dryer will turn off automatically. <br />
<br />
If the user chooses to start with the automatic mode, the duration will depend on the temperature that the sensor measures to confirm that the cloth is dryer, then the dryer will turn off.<br />
<br />
'''7.2.3 Temperature and Humidity'''<br />
<br />
For the manual mode, the temperature and humidity to dry the cloth are stabilized, and there are two options for the user to choose which are hot and moderate. For the automatic mode, the sensor is used to measure the outside air temperature and humidity of the dryer. This process is continuing until the sensor reads the set temperature to confirm that the cloth is dried then the dryer stopped to work. <br />
<br />
'''7.2.4 The Flowchart Program''' <br />
[[File:The_Program_Flowchart.png|thumb|flowchart]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=Sandbox:Team_1_User_Interface&diff=606634Sandbox:Team 1 User Interface2020-07-13T03:30:56Z<p>MENNATALLAABDELRAHMAN: New section</p>
<hr />
<div>'''User Interface Design''' <br />
<br />
'''7.1 Requirements'''<br />
<br />
'''7.1.1 Functions''' <br />
<br />
The functions of the user-interface sub-team are making the buttons read users’ input which represent each choice. <br />
<br />
Different instructions need to be displayed on the LCD screen when any of the three buttons is pressed by users. <br />
<br />
The LCD should be able to display messages. <br />
<br />
If the message is long, the LCD should be able to scroll left and right to ensure that users can read each word clearly. <br />
<br />
'''7.1.2 Objectives''' <br />
<br />
The objectives of the user-interface sub-team are to display messages of the function of each button in each step. For example, the message required users to start the dryer will be displayed at the beginning. <br />
<br />
When the dryer is working, the remaining time will be displayed on the screen and the time will be counted down. <br />
<br />
After the dryer finished working, the buzzer will make a sound to remind users to take out the things in the dryer. <br />
<br />
A 10k ohms potentiometer is also used to adjust the brightness of the LCD. <br />
<br />
'''7.1.3 Constraints'''<br />
<br />
The delay time between each step should be at least 10 seconds. A long delay time enables users to have enough time to make decisions.<br />
<br />
Second, thick wires and resistors should be used for safety. The current in the wire may be large if there are any wrong connections on the breadboard.<br />
<br />
In addition, the message should be displayed at the center of the LCD screen & the messages should be scrolled left and right. (The screen may be too small for all the messages shown on, so the message should be scrolled left and right repeatedly in order to enable users to see all information clearly.<br />
<br />
'''7.2 The design''' <br />
<br />
'''7.2.1 Hardware Layout'''<br />
<br />
The system of the cloth-dryer is designed to contain LCD, three buttons, and switch to allow the user to interact with the machine.<br />
<br />
The user can turn on and of the dryer using the switch. <br />
<br />
The three buttons are utilized to make the user input their preferences and operate the machine accordingly to the user inputs. <br />
<br />
'''7.2.2 Operating sequence'''<br />
<br />
The starts and end operation of the dryer depending on the mode whether it in manual mode or automatic mode.<br />
<br />
If the user turns on the switch and choose the manual, the dryer will operate for a specific time that is chosen by the user, and once the time passed, the dryer will turn off automatically. <br />
<br />
If the user chooses to start with the automatic mode, the duration will depend on the temperature that the sensor measures to confirm that the cloth is dryer, then the dryer will turn off.<br />
<br />
'''7.2.3 Temperature and Humidity''' <br />
<br />
'''7.2.4 The Flowchart Program''' <br />
[[File:The_Program_Flowchart.png|thumb|flowchart]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=Sandbox:Team_1_User_Interface&diff=606627Sandbox:Team 1 User Interface2020-07-13T03:22:53Z<p>MENNATALLAABDELRAHMAN: format</p>
<hr />
<div>'''User Interface Design''' <br />
<br />
'''7.1 Requirements'''<br />
<br />
'''7.1.1 Functions''' <br />
<br />
The functions of the user-interface sub-team are making the buttons read users’ input which represent each choice. <br />
<br />
Different instructions need to be displayed on the LCD screen when any of the three buttons is pressed by users. <br />
<br />
The LCD should be able to display messages. <br />
<br />
If the message is long, the LCD should be able to scroll left and right to ensure that users can read each word clearly. <br />
<br />
'''7.1.2 Objectives''' <br />
<br />
The objectives of the user-interface sub-team are to display messages of the function of each button in each step. For example, the message required users to start the dryer will be displayed at the beginning. <br />
<br />
When the dryer is working, the remaining time will be displayed on the screen and the time will be counted down. <br />
<br />
After the dryer finished working, the buzzer will make a sound to remind users to take out the things in the dryer. <br />
<br />
A 10k ohms potentiometer is also used to adjust the brightness of the LCD. <br />
<br />
'''7.1.3 Constraints'''<br />
<br />
The delay time between each step should be at least 10 seconds. A long delay time enables users to have enough time to make decisions.<br />
<br />
Second, thick wires and resistors should be used for safety. The current in the wire may be large if there are any wrong connections on the breadboard.<br />
<br />
In addition, the message should be displayed at the center of the LCD screen & the messages should be scrolled left and right. (The screen may be too small for all the messages shown on, so the message should be scrolled left and right repeatedly in order to enable users to see all information clearly.<br />
<br />
'''7.2 The design''' <br />
<br />
'''7.2.1 Hardware Layout'''<br />
<br />
The system of the cloth-dryer is designed to contain LCD, three buttons, and switch to allow the user to interact with the machine.<br />
<br />
The user can turn on and of the dryer using the switch. <br />
<br />
The three buttons are utilized to make the user input their preferences and operate the machine accordingly to the user inputs. <br />
<br />
'''7.2.2 Operating sequence'''<br />
<br />
The starts and end operation of the dryer depending on the mode whether it in manual mode or automatic mode.<br />
<br />
If the user turns on the switch and choose the manual, the dryer will operate for a specific time that is chosen by the user, and once the time passed, the dryer will turn off automatically. <br />
<br />
If the user chooses to start with the automatic mode, the duration will depend on the temperature that the sensor measures to confirm that the cloth is dryer, then the dryer will turn off.<br />
<br />
Flowchart<br />
[[File:The_Program_Flowchart.png|thumb|flowchart]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=Sandbox:Team_1_User_Interface&diff=606623Sandbox:Team 1 User Interface2020-07-13T03:18:27Z<p>MENNATALLAABDELRAHMAN: Format</p>
<hr />
<div>'''User Interface Design''' <br />
<br />
'''7.1 Requirements'''<br />
<br />
'''7.1.1 Functions''' <br />
<br />
The functions of the user-interface sub-team are making the buttons read users’ input which represent each choice. <br />
<br />
Different instructions need to be displayed on the LCD screen when any of the three buttons is pressed by users. <br />
<br />
The LCD should be able to display messages. <br />
<br />
If the message is long, the LCD should be able to scroll left and right to ensure that users can read each word clearly. <br />
<br />
'''7.1.2 Objectives''' <br />
<br />
The objectives of the user-interface sub-team are to display messages of the function of each button in each step. For example, the message required users to start the dryer will be displayed at the beginning. <br />
<br />
When the dryer is working, the remaining time will be displayed on the screen and the time will be counted down. <br />
<br />
After the dryer finished working, the buzzer will make a sound to remind users to take out the things in the dryer. <br />
<br />
A 10k ohms potentiometer is also used to adjust the brightness of the LCD. <br />
<br />
'''7.1.3 Constraints'''<br />
<br />
The delay time between each step should be at least 10 seconds. A long delay time enables users to have enough time to make decisions.<br />
<br />
Second, thick wires and resistors should be used for safety. The current in the wire may be large if there are any wrong connections on the breadboard.<br />
<br />
In addition, the message should be displayed at the center of the LCD screen & the messages should be scrolled left and right. (The screen may be too small for all the messages shown on, so the message should be scrolled left and right repeatedly in order to enable users to see all information clearly.<br />
<br />
'''7.2 The design''' <br />
<br />
<nowiki> </nowiki>'''7.2.1 Hardware Layout''' <br />
<br />
The system of the cloth-dryer is designed to contain LCD, three buttons, and switch to allow the user to interact with the machine.<br />
<br />
The user can turn on and of the dryer using the switch. <br />
<br />
The three buttons are utilized to make the user input their preferences and operate the machine accordingly to the user inputs. <br />
<br />
<nowiki> </nowiki>'''7.2.2 Operating sequence'''<br />
<br />
The starts and end operation of the dryer depending on the mode whether it in manual mode or automatic mode.<br />
<br />
If the user turns on the switch and choose the manual, the dryer will operate for a specific time that is chosen by the user, and once the time passed, the dryer will turn off automatically. <br />
<br />
If the user chooses to start with the automatic mode, the duration will depend on the temperature that the sensor measures to confirm that the cloth is dryer, then the dryer will turn off.<br />
<br />
Flowchart<br />
[[File:The_Program_Flowchart.png|thumb|flowchart]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=Sandbox:Team_1_User_Interface&diff=606620Sandbox:Team 1 User Interface2020-07-13T03:11:36Z<p>MENNATALLAABDELRAHMAN: the content</p>
<hr />
<div>7.1 Requirements<br />
<br />
Functions : <br />
<br />
The functions of the user-interface sub-team are making the buttons read users’ input which represent each choice. <br />
<br />
Different instructions need to be displayed on the LCD screen when any of the three buttons is pressed by users. <br />
<br />
The LCD should be able to display messages. <br />
<br />
If the message is long, the LCD should be able to scroll left and right to ensure that users can read each word clearly. <br />
<br />
Objectives: <br />
<br />
The objectives of the user-interface sub-team are to display messages of the function of each button in each step. For example, the message required users to start the dryer will be displayed at the beginning. <br />
<br />
When the dryer is working, the remaining time will be displayed on the screen and the time will be counted down. <br />
<br />
After the dryer finished working, the buzzer will make a sound to remind users to take out the things in the dryer. <br />
<br />
A 10k ohms potentiometer is also used to adjust the brightness of the LCD. <br />
<br />
Constraints:<br />
# The delay time between each step should be at least 10 seconds. A long delay time enables users to have enough time to make decisions. <br />
# Second, thick wires and resistors should be used for safety. The current in the wire may be large if there are any wrong connections on the breadboard.<br />
# In addition, the message should be displayed at the center of the LCD screen & the messages should be scrolled left and right. (The screen may be too small for all the messages shown on, so the message should be scrolled left and right repeatedly in order to enable users to see all information clearly.<br />
<br />
7.2 The design <br />
<br />
7.2.1 Hardware Layout <br />
<br />
The system of the cloth-dryer is designed to contain LCD, three buttons, and switch to allow the user to interact with the machine.<br />
<br />
The user can turn on and of the dryer using the switch. <br />
<br />
The three buttons are utilized to make the user input their preferences and operate the machine accordingly to the user inputs. <br />
<br />
7.2.2 Operating sequence<br />
<br />
The starts and end operation of the dryer depending on the mode whether it in manual mode or automatic mode.<br />
<br />
If the user turns on the switch and choose the manual, the dryer will operate for a specific time that is chosen by the user, and once the time passed, the dryer will turn off automatically. <br />
<br />
If the user chooses to start with the automatic mode, the duration will depend on the temperature that the sensor measures to confirm that the cloth is dryer, then the dryer will turn off.<br />
<br />
Flowchart<br />
[[File:The_Program_Flowchart.png|thumb|flowchart]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=File:The_Program_Flowchart.png&diff=606619File:The Program Flowchart.png2020-07-13T03:09:35Z<p>MENNATALLAABDELRAHMAN: User created page with UploadWizard</p>
<hr />
<div>=={{int:filedesc}}==<br />
{{Information<br />
|description={{en|1=flowchart}}<br />
|date=2020-07-12<br />
|source={{own}}<br />
|author=[[User:MENNATALLAABDELRAHMAN|MENNATALLAABDELRAHMAN]]<br />
|permission=<br />
|other versions=<br />
}}<br />
<br />
=={{int:license-header}}==<br />
{{self|cc-by-sa-4.0}}<br />
<br />
[[Category:Diagram]]<br />
[[Category:Picture]]</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=Sandbox:Team_1_User_Interface&diff=606613Sandbox:Team 1 User Interface2020-07-13T03:05:48Z<p>MENNATALLAABDELRAHMAN: No thing</p>
<hr />
<div>7.1 Requirements<br />
<br />
Functions : <br />
<br />
The functions of the user-interface sub-team are making the buttons read users’ input which represent each choice. <br />
<br />
Different instructions need to be displayed on the LCD screen when any of the three buttons is pressed by users. <br />
<br />
The LCD should be able to display messages. <br />
<br />
If the message is long, the LCD should be able to scroll left and right to ensure that users can read each word clearly. <br />
<br />
Objectives: <br />
<br />
The objectives of the user-interface sub-team are to display messages of the function of each button in each step. For example, the message required users to start the dryer will be displayed at the beginning. <br />
<br />
When the dryer is working, the remaining time will be displayed on the screen and the time will be counted down. <br />
<br />
After the dryer finished working, the buzzer will make a sound to remind users to take out the things in the dryer. <br />
<br />
A 10k ohms potentiometer is also used to adjust the brightness of the LCD. <br />
<br />
Constraints:<br />
# The delay time between each step should be at least 10 seconds. A long delay time enables users to have enough time to make decisions. <br />
# Second, thick wires and resistors should be used for safety. The current in the wire may be large if there are any wrong connections on the breadboard.<br />
# In addition, the message should be displayed at the center of the LCD screen & the messages should be scrolled left and right. (The screen may be too small for all the messages shown on, so the message should be scrolled left and right repeatedly in order to enable users to see all information clearly.<br />
Flowchart</div>MENNATALLAABDELRAHMANhttps://wiki.ubc.ca/index.php?title=File:The_Flowchart_Program.png&diff=606610File:The Flowchart Program.png2020-07-13T03:00:57Z<p>MENNATALLAABDELRAHMAN: User created page with UploadWizard</p>
<hr />
<div>=={{int:filedesc}}==<br />
{{Information<br />
|description={{en|1=flowchart}}<br />
|date=2020-07-12<br />
|source={{own}}<br />
|author=[[User:MENNATALLAABDELRAHMAN|MENNATALLAABDELRAHMAN]]<br />
|permission=<br />
|other versions=<br />
}}<br />
<br />
=={{int:license-header}}==<br />
{{self|cc-by-sa-4.0}}<br />
<br />
[[Category:Picture]]<br />
[[Category:Program]]</div>MENNATALLAABDELRAHMAN