Documentation:UBC Content Management System/Going Live
|Welcome to the support documentation for the
UBC CMS Service.
|UBC Collab Theme|
Note: These instructions were updated on March 21st 2018. It’s important you read through the new process.
Publishing your site, or having it go live, is really a matter of "domain mapping". First, you'll need a domain or URL where you want your site to live (for example: mysite.ubc.ca or mysite.com). Then you will need an SSL certificate. Then you'll need to have your domain point to the IP address of our servers. And finally, you’ll need to tell WordPress to load from your new URL.
Here's the step by step process if you plan to use a UBC URL (such as mysite.ubc.ca):
- First, you need to make a subdomain request from UBC IT. The instructions can be found here.
*IMPORTANT When you submit the request, please specify that your website is hosted with CTLT and our IP address is 18.104.22.168 and expect at least two business days for this to happen.
Second, we need an SSL Certificate
As of March 21st 2018 all new domain-mapped sites on UBC CMS need to run on HTTPS. This means that your domain will need an SSL certificate on our platform. This is due to several browser vendors now marking sites as ‘not secure’ if they are using HTTP under certain circumstances and, as of June 2018, they will mark ALL sites that use HTTP as not secure.
UBC CMS already contains several wildcard and standalone SSL Certificates. If the domain you wish to use is of the form <something>.ubc.ca or <something>.<something>.ubc.ca then there is a good chance that we already have an SSL certificate for you to use.
If you are unsure, please contact us.
If you know a new certificate is needed
If you know that your UBC subdomain is currently not covered by the certificates that we have on UBC CMS then UBC IT can help you acquire one and have it placed onto UBC CMS. You need to follow steps 1 through 6 (inclusive) at https://confluence.it.ubc.ca/display/ITSecurity/how+to+obtain%2C+deploy+and+verify+an+X.509+certificate
These steps will generate everything we need from you in order to have your site running on HTTPS. Now you need to send us those files. Zip them up, and then add them to UBC Workspace, with a password. Send an email to email@example.com - which will generate a ServiceNow ticket - with a link to the file and share the password with us. We’ll also need to know which domain this is for, in that email.
Once we have that info, we can then speak with the systems team that runs the piece of hardware where the certificates need to reside. They will install the certificate on your behalf.
If it’s a non UBC domain (i.e. yourdomain.com rather than yourdomain.ubc.ca) then you will need to purchase a certificate from https://www.gandi.net/en/security (you need the ‘Standard’ certificate) and then you will need to provide to us (via WorkSpace) the Certificate and the private key used to generate that certificate.
Once a certificate is on CMS
We’re nearly there. You have your subdomain registered, you have your SSL certificate installed onto UBC CMS, you have your content on your site ready to go.
- Next, log in to your WordPress Dashboard and navigate to Tools > Domain Mapping and put in your requested domain (such as mysite.ubc.ca) to "Add new domain" and make sure that "Primary domain for this blog" is unchecked.
- Then you may just need to wait to hear back from UBC IT when your requested domain points successfully to our server.
- Then you can log in to the WordPress Dashboard and go back to Domain Mapping and set your requested URL to be the primary domain.