Documentation:Clickers and Connect/Adding an iClicker Registration Link to Your Course in Connect

From UBC Wiki
Jump to: navigation, search

Adding an iClicker registration link to your Course

  • Students are now able to register and deregister clickers in Connect through the i>clicker registration link that this section will help you set up!
  • Log into Connect
  • Open the course for which you wish to add an i>clicker Student Registration link
  • Make sure you are in "Teacher View"
  • Make sure Edit Mode is "On" (button is in the top right corner)


The link can be added to one of two locations:

Adding the link to the Sidebar

  • Click on the "+" symbol at the top left of the sidebar
  • Click "Tool Link" as shown in the image below:
Note: If you do not see the "i>clicker Student Registration" tool link, you will need to enable the iclicker tool by:
1. Go to "Customization" near the bottom of the sidebar
2. Click on "Tool Availability"
3. Find and check off the boxes for "i>clicker Instructor Resources" and "i>clicker Student Registration"
4. Go to the bottom of the page to "Submit" the changes
5. Try adding the link again
Adding the Registration Link to the Sidebar
Adding the Registration Link to the Sidebar
  • Add a name for the link
  • Select "i>clicker Student Registration" for the Type field
  • Check the "Available to Users" box
  • Click "Submit"

Adding the link to the Content Area

  • Click on the "Content Area" link (named as "Content" in the left-hand sidebar in the image shown below) only if you have already created a "Content Area" from the "+" drop down list
Note: You can create a "Content Area" by clicking "+" then "Content Area". Fill in the fields and click "Submit"
  • Click "Tools" then "More Tools" then "i>clicker Student Registration" as shown in the image below:
Note: If you do not see the "i>clicker Student Registration" tool link, you will need to enable the iclicker tool by:
1. Go to "Customization" near the bottom of the sidebar
2. Click on "Tool Availability"
3. Find and check off the boxes for "i>clicker Instructor Resources" and "i>clicker Student Registration"
4. Go to the bottom of the page to "Submit" the changes
5. Try adding the link again
Adding the i>clicker Remote Tool
  • Fill in all fields on the form, including start and end dates if desired
Adding the i>clicker Remote Tool
  • Click "Submit"

This i>clicker Registration link only needs to be added to one of the two locations.

Note: The clicker registration module that can be added directly to the course homepage does not allow students to deregister clickers. It is suggested that one of the above methods is used instead.